answers a call. The maximum outgoing message length is 60
seconds.
Follow these steps to record the OGM.
1. Hold down
ANNOUNCE
Note: When the memory is full,
announces, "Memory is full." You cannot record the outgo-
ing message. Delete old messages to make room in mem-
ory (see "Erasing Messages" on Page 16).
2. Speak your message in a normal voice about 8 inches (20
cm) from the front of the TAD. The display counts down the
seconds as you record.
Hint: Do not tell callers that you are not home. Instead, say
that you cannot come to the phone right now.
3. When you finish recording, release
beeps and repeats the outgoing message so you can verify
it.
Notes:
• To play the outgoing message at any time, press
. If no outgoing message is recorded, the TAD
ANNOUNCE
says "No announcement."
• To record a new message, begin again from Step 1.
12
93 93 93 93
. The TAD beeps, and
)/ )/ )/ )/
appears and the TAD
ANNOUNCE
Preparation
appears.
. The TAD