Setting The Incoming Message Length; Recording The Outgoing Message (Ogm) - Radio Shack 43-3801 Owner's Manual

4. Repeatedly press or hold down
hear the correct minute.
Note: When you hold down
moves forward in 10 minute intervals until it reaches 00.
5. Release
time you set.
To hear the current day and time, press
system is on or off.
If you have not set the day and time and you press
the system announces "Please set time".
SETTING THE INCOMING MESSAGE
LENGTH
Slide
INCOMING MSG
(minutes) to choose the length of incoming messages.
When you slide
only), the system plays your outgoing message, but the caller
cannot record a message. After the system answers, it monitors
the line for 10 seconds for any remote code entry.
RECORDING THE OUTGOING MESSAGE
(OGM)
You can use the system's prerecorded outgoing message,
"Hello, please leave a message after the tone," or record your
own.
To record an outgoing message:
10
. The system announces the day and
TIME/SKIP
on the back of the system to
INCOMING MSG
MINUTE/TWO WAY
MINUTE/TWO WAY
to
ANN ONLY
Preparation
, the system
while the
TIME/SKIP
TIME/SKIP
or
1
(announcement
until you
,
5 MIN