The Zonar 2010 unit is stored in this vehicle mount when not in use. Inserting a Zonar 2010 handheld into the vehicle mount radio will allow the 2010 unit to communicate with the radio. Once the EVIRNET™ base station radio contacts this vehicle mount radio, Zonar inspection data is transferred over the RF link from vehicle radio to the remote base station.
Page 3
The preceding statement must be included as a CAUTION statement in manuals for OEM products to alert users on FCC RF Exposure compliance. Warning (Part 15.21) Caution: Any change or modification not expressly approved by Zonar Systems could void the user’s authority to operate the equipment. Page 3 of 8...
EVIRNET™ Vehicle Mount Radio Limited Warranty Zonar does not represent or warrant that the hardware and software are free of bugs or errors and shall not be liable for any losses (financial or non-financial) occurring as a result of such bugs or errors. No other warranty express or implied, including any warranties of merchantability or particular purpose, is provided for any hardware or software provided pursuant to this contract.
EVIRNET™ Vehicle Mount Radio Getting Started: Connect the red wire from the radio vehicle mount to the vehicle’s 12VDC supply, and the black wire to the vehicles ground. Now that power is applied to this radio vehicle mount, the base station will initiate communication with this radio vehicle mount.
EVIRNET™ Vehicle Mount Radio System Overview: The basic system is comprised of a vehicle mount radio typically located in a vehicle, and a remote base station. BASE STATION AND COMPUTER REMOTE VEHICLES WITH EVIRNET RADIOS Page 7 of 8...
EVIRNET™ Vehicle Mount Radio System Specifications: • Frequency Hopping Spread Spectrum Radio • 902 MHz to 928 MHz • 500mW transmit power • -103 dBm Sensitivity • 53 Hopping Channels • Operating Temp -20C to +70C • Range 1500FT Obstructed, 4000FT+ Unobstructed •...