Advertisement
4. Mute Input and the AMC PDM1 (Phone-Doorbell-Mute Module)
(This is an optional feature)
The back panel of the X1616 has a 3.5mm non-shorting stereo connector input
labeled "Mute". This is designed to be used with the AMC PDM1 Phone-Doorbell-
Mute module. When the PDM1 is connected, the system will temporarily mute when
the phone or doorbell rings.
Front
1,2 Doorbell (This is an optional feature)
The back of PDM1 will accept up to two AC or DC voltages from two different
doorbell chimes.
This connection is done with two conductor wire from the terminals on the doorbell
chime to the Doorbell A or Doorbell B inputs on the back of the PDM1, Polarity is
not important for this connection.
3. RJ-11 Connection
Up to two phone lines can be brought into the RJ-11 connection on the back.
The voltage from the phone ringer will trigger the X1616 System to mute.
AMC PDM1 (Phone-Doorbell-Mute Module)
11
Rear
1
2
3
Advertisement
