Related Manuals for Chemin'Arte 3X
Summary of Contents for Chemin'Arte 3X
- Page 1 Our Logo in red www.cheminarte.com ELECTRIC FIREPLACE INSTRUCTION MANUAL ATTENTION: 1. Find a location for the electric heater that is protected from direct sunlight. Do not plug the electric heater into the power outlet before you read all instructions...
-
Page 2: Parts List
Electrical Parameter Power supply: AC220-240V Frequency: 50Hz Power: 2000W NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Important Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the... - Page 3 Installation Step 1: Select the wall location where you want to hang your electric heater. Draw a horizontal line using a level and mark 4 drill holes for the 4 anchor screws. Note : The holes are for mounting of heater and it shall be level so that the heater can be mounted properly and leveled.
- Page 4 Step 5: Secure the mounting bracket to the heater using 2 mounting screws. See Fig. E. Step 6: Put the rock bed into the heater. See Fig. F. Step 7: Hold the front cover tightly and engage it with the 6 keyhole slots on both sides of the heater.
- Page 5 Step 8: Secure the front cover to the top of heater using 3 mounting screws. See Fig. H. 3-wire cable from power supply to 3-wire cable from heater Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire: A.
-
Page 6: Operating Instructions
Operating Instructions Once the electric heater has been properly installed and connected to a ground electrical outlet, it is ready to operate. Note: Ensure the circuit breakers for the power supply are turned on. Operation By The Control Panel The main switch is located at the right side bottom of you heater. The other controls are located at the right bottom of your heater or on the front glass panel (it depends on your model) : Press this button, you have power and your remote is ready to operate your unit. - Page 7 : Press this button for main power function. Press again will stop the main power function. Once the heater is switched off, the unit will keep working with air flow for 60 more seconds. : Press this button to toggle between the two temperature scales. The corresponding Celsius (C) or Fahrenheit (F) LED indicates the current setting.
- Page 8 Maintenance: WARNING: Completely disconnect power before attempting any maintenance or cleaning, to reduce the risk of fire or electric shock. Maintenance should only be performed by a certified technician. Cleaning: Before cleaning any parts of the fireplace make sure to first turn off the controls and then unplug the unit from power source.
Need help?
Do you have a question about the 3X and is the answer not in the manual?
Questions and answers