Related Manuals for WDR WDR Series
Summary of Contents for WDR WDR Series
- Page 1 WDR and D&N Series Camera Super Double Scan 3D DNR Owner’s Manual www.ltv-cctv.ru LTV-CDH-821LHW-V2.8-12...
- Page 2 Flex IR Vandal Dome Series TDN Lens, dual power, fan & heater, 36ea ir leds, water-proofe...
-
Page 3: Table Of Contents
Thank you very much for your purchase. Contents Please read this manual carefully before attempting to install the device. It contains useful information for the proper installation of your camera. Caution Features Warning CAUTION IR VANDAL CAMERA To reduce the risk of electric shock, Components Do not remove cover ( or Back), Main Parts... -
Page 4: Features
2) D&N 600TVL has no function. So, OSD Menu for WDR Camera, may be different with D&N no WDR Camera. 13) Do not use the camera close to a gas or oil leak. It may result in a fire or other hazards. -
Page 5: Main Parts
Components Main Part Flex IR Vandal Dome Series Flex IR Vandal Dome Series 8) IR LED Board 1) 3 Axis Main Bracket 3) Lens Dome Camera 5) Dual Power Board 7) Fan and Heater Focus Lever (FAR NEAR) Zoom Lever (TELE WIDE) 2) Cable for Extra Video... - Page 6 Main Part Main Part Flex IR Vandal Dome Series Flex IR Vandal Dome Series 1) 3 Axis Main Bracket TILT : You can adjust from 0 C to 360 C. ° ° Use the 3Axis bracket , it can easy be install to anyplace. Like wall or ceiling. PAN : You can adjust from 0 C to 90 C.
-
Page 7: Installation
Installation Installation Flex IR Vandal Dome Series Flex IR Vandal Dome Series Step1. Use the Mounting Template to make the hole on the ceiling, and then fix 1. Fix the Base Housing to the desired place with screws supplied. the Base Housing to the desired place with screws supplied. After cable and base 2. -
Page 8: Connection
Connection Connection Flex IR Vandal Dome Series Flex IR Vandal Dome Series 1) Connection to Monitor and Power 3) Connection to UTP If you select the UTP camera , you can connect the video signal like below. - Video output VIDEO 1) Yellow color : Video output >... -
Page 9: Camera Operation
SAMSUNG, PELCO-P or PELCO-D . When use RS-485 control , cable isolate the drain wire. NOTE: 1) WDR is the main exclusive function for WDR 600TVL Series Camera. 2) D&N 600TVL has no function. So, OSD Menu for WDR Camera, may be different with D&N no WDR Camera. - Page 10 If you set the VPS (Virtual Progressive Scan) option, the camera will display the image in progressive format.
- Page 11 NOTE: 1) WDR is the main exclusive function for WDR 600TVL Series Camera. 2) D&N 600TVL has no function. So, OSD Menu for WDR Camera, may be different with D&N no WDR Camera.
- Page 12 BACKLIGHT SENS-UP if the function is set , the menu can not be set to BRIGHTNESS NIGHT sets the brightness degree of color to BW switching, LOW MID for which you can select from , and...
- Page 13 HIGH HIGH LOW . As you adjust it from , the screen switches to black and white mode under the darker situation. DWELL TIME DAY NIGHT sets the time to maintain switched black and white mode BRIGHTNESS NIGHT DAY sets the brightness degree of BW to color switching, for LOW MID HIGH...
- Page 16 P R O T O C O L S A M S U N G A D D R E S S C O M M . T Y P E R S 4 8 5 , H A L F B A U D R A T E 9 6 0 0 COMMUNICATION...
- Page 17 0.0004 0.00 Off/On (x128/NTSC, x160/PAL) Off/On NOTE: 1) WDR is the main exclusive function for WDR 600TVL Series Camera. (1/50) 2) D&N 600TVL has no function. So, OSD Menu for WDR Camera, may be different with D&N no WDR Camera.
- Page 18 0.95Kg changing. appear on the screen. NOTE: 1) WDR is the main exclusive function for WDR 600TVL Series Camera. 2) D&N 600TVL has no function. So, OSD Menu for WDR Camera, may be different with D&N no WDR Camera.
-
Page 19: Shutter
Troubleshooting Troubleshooting Troubleshooting Problems Troubleshooting Problems a) Please check if 'MOTION DETECTION' mode RS-485 Check the polarity between RS-485 Control Port The MOTION is turned on. and RS-485 cable. Communication fails. DETECTION function b) Please check if the MD LEVEL is too low. is not working.