MC315 User Guide 2005-3-7 Contents Introduction..........................3 Specifications ..........................3 Care for your card ........................3 Features .............................4 Insert R-UIM card to MC315....................4 Setup and Uninstall ........................4 5.1 System Requirements......................4 5.2 Setup for Windows 2000....................5 5.2.1 Setup.........................5 5.2.2 Uninstall ........................8 5.3 Setup for Windows XP......................9 5.3.1 Setup.........................9...
The antenna should bend easily. Do not forcefully bend the antenna or plugs the antenna in and out MC315 card frequently. The MC315 card should fit easily into your PC slot. Forcing the card into a slot may damage connector pins.
2005-3-7 4. Features Insert R-UIM card to MC315 When MC315 card start up, the lamp is in YELLOW. After a few seconds, the PCMCIA card will ready to work, the lamp is in GREEN. 5. Setup and Uninstall 5.1 System Requirements The MC315 wireless network card is supported on: •...
Note: Don’t insert the ZTE MC315 Wireless network Card before setup. Please find “autosetup.exe” first in ZTE MC315 CD, and double click the icon of autosetup.exe, then choose “English” when the picture displayed in the screen. 2. When you see this window, please click “next”.
Page 6
MC315 User Guide 2005-3-7 3. Select the location where the program is to be installed, then click “Next”. 4. When you see this window, please click “next”. 5. When you see this window, please click “install”. ZTE Corporation page6 http://www.zteit.com...
MC315 User Guide 2005-3-7 6. Please wait. 7. Please insert the MC315 card. (If your card is in the slot, please insert the card again) ZTE Corporation page7 http://www.zteit.com...
9. Click “Finish” to close the last screen of the wizard. Now you can start the application for MC315. 5.2.2 Uninstall 1. Select Start -> Programs -> ZTE MC315 -> Uninstall ZTE MC315. You will be asked if uninstall the card. Click “Yes”. ZTE Corporation page8 http://www.zteit.com...
MC315 User Guide 2005-3-7 2. Please wait. 3. Click “OK” when you are notified that uninstall is complete. 5.3 Setup for Windows XP 5.3.1 Setup Note: Don’t insert the ZTE MC315 WIRELESS Card before setup. ZTE Corporation page9 http://www.zteit.com...
Page 10
MC315 User Guide 2005-3-7 Please find “autosetup.exe” first in ZTE MC315 CD, and double click the icon of autosetup.exe, then choose “English” when the picture displayed in the screen. 2. When you see this window, please click “next”. 3. Select the location where the program is to be installed, then click “Next”.
Page 11
MC315 User Guide 2005-3-7 4. When you see this window, please click “next”. 5. When you see this window, please click “install”. ZTE Corporation page11 http://www.zteit.com...
Page 12
MC315 User Guide 2005-3-7 6. Please wait. 7. Please insert the MC315 card. (If your card is in the slot, please insert the card again) ZTE Corporation page12 http://www.zteit.com...
8. Please wait for updating the driver. 9. Click “Finish”. Now you can start the application for MC315. 5.3.2 Uninstall 1. Select Start -> Programs -> ZTE MC315 -> Uninstall ZTE MC315. You will be asked if uninstall the card. Click “Yes”. ZTE Corporation page13 http://www.zteit.com...
MC315 User Guide 2005-3-7 2. Please wait. 3. Click “OK” when uninstall is complete. 6. The Main Window and Icons You can launch the program by: Double clicking the icon of MC315 in the desktop. ZTE Corporation page14 http://www.zteit.com...
MC315 User Guide 2005-3-7 Or selecting Start -> Programs -> ZTE MC315 -> ZTE MC315. After initialization, the main window of the application will be displayed in the screen. There are icons in the top of the main window. That indicate:...
MC315 User Guide 2005-3-7 1. Click “connect/disconnect” icon in main window. 2. Click “connect” button. Disconnect: 1. Click “disconnect” button. 8. Connection Record Note: Connection Record is not official data. It's only for users’ reference. The connection record is displayed when you click the “Connection record” icon.
Made a call: 1. Plug the earphone in the MC315 card if it is not plugged in the card. 2. Click “voice call” icon; 3. Enter the number you want to dial by either clicking the number buttons on the dial pad or typing the numbers on your keyboard.
MC315 User Guide 2005-3-7 10. Call History Call history maintains a record of your outgoing, incoming and missed calls. You can add an entry to the Phone Book, make a call to a number contained in one of the call records, and send messages to a number contained in one of the call records.
MC315 User Guide 2005-3-7 To send SMS message: 1. Click “Send SMS” icon in the window. 2. Input the message in the screen that is on the left screen of the window. 3. Click “Add” button to enter the recipients for the message by typing the phone numbers.
MC315 User Guide 2005-3-7 1. Click “read SMS” icon in the window. 2. Select the Inbox or Outbox in the drop-down menu. 3. Click the message you want to read in the messages list that is in the right screen of the window.
MC315 User Guide 2005-3-7 To send a message in the Phone Book: 1. Select the entry in the Phone Book window. 2. Click “SMS” button. The Phone Book records can be stored in the PC or UIM card. You can copy them from one storage media to another by clicking “Copy”...
Page 22
This section describes how to diagnose and solve these and other problems. If, after reading this section, you are unable to resolve a problem: • Check for the latest MC315 troubleshooting solutions at //www.zteit.com • Contact your service provider. Symptoms...
MC315 User Guide 2005-3-7 Symptoms Possible causes Suggestions When attempting a Correct the settings. You can get the dial-up data information from your service provider. connection, window User name or password is e.g. In China Unicom, they are: displays the wrong.