Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TeAx TCSmart+
- Page 1 User manual for TCSmart+ (rev0.9 January 2018)
-
Page 2: Table Of Contents
1.3 Software Description......................4 2 Operation............................5 2.1 Intended Use......................... 5 2.2 Wiring and Connectors......................6 2.2.1 Servo Connector......................7 2.2.2 TeAx GPS Input......................8 2.2.3 Supply..........................8 2.2.4 UART..........................9 2.2.5 Push Button........................10 2.2.6 Status LED........................10 2.2.7 Micro-SD-Card Slot...................... 10 2.2.8 TeAx TCFusionZoom Connector.................. -
Page 3: Overview And Features
Please take care not to isolate the aluminum casing especially in situations when high cpu load is generated permanently. The surface can become hot in such situations (especially the area with the cooling stripes above the TeAx logo)! Overview of TCSmart+ (cf. - Page 4 ThermalCapture Smart+ User Manual package support it’s possible to do native development on the machine itself. No cross compile setup is needed. For convenience there’ s a ready to go setup of a (including Qt Creator) installation with pre configured demo projects that show examples on how to connect TCFusionZoom, how to build a qt-based live viewer or how to to process incoming data of TCFusionZoom in OpenCV.
-
Page 5: Operation
ThermalCapture Smart+ User Manual 2 Operation Please take some time to read the manual before using TCSmart+. A couple of things will become clearer regarding the miscellaneous interfaces of TCSmart+. Additionally there will be some hints on howto use the operating system. 2.1 Intended Use •... -
Page 6: Servo Connector
ThermalCapture Smart+ User Manual Servo Connector TeAx-GPS input (UART in) Supply UART Push-Button Status LED Micro-SD-Card Slot TCFusionZoom Connector Micro HDMI USB3 Port USB2 Port RJ45 Gigabit Ethernet Port Micro Jack Debug Serial Connector 2.2.1 Servo Connector The Servo-Connector is forwarded to the JST-7-Pin connector for TCFusionZoom. This makes it possible to feed in an SBUS signal or a Servo PWM for controlling TCFusionZoom’s behavior (e.g. -
Page 7: Teax Gps Input
ThermalCapture Smart+ User Manual 2.2.2 TeAx GPS Input The TeAx-GPS-Input of TCSmart+ can be used to connect an TeAx-GPS-Module with an also connected TCFusionZoom. This way the TCFusionZoom still adds GPS information to the recorded or streamed data. GPS Data Input... -
Page 8: Uart
ThermalCapture Smart+ User Manual Power supply for the TCSmart+ and additional hardware (e.g. TCFusionZoom) GND of supply 2.2.4 UART The UART of TCSmart+ can be used as communication interface (incoming or outgoing control commands for example). Please note the signal voltage level of 3.3V (Never connect regular RS232 signal levels to the UART connection of TCSmart+). -
Page 9: Push Button
T h e JST-7-Pin plug can be used to connect a TCFusionZoom. Besides the power supply for TCFusionZoom (V+ and GND) this interface connects the TeAx GPS Input of TCSmart+ to the TCFusionZoom. Please refer to the JST-7-Pin connector image and the table below for a... -
Page 10: Micro Hdmi
T h e Trigger_Out pin forwards a PWM signal from the Servo Connector of TCSmart+ to the Trigger_In pin of TCFusionZoom. On Pin1 is the supply for an optionally TeAx-GPS-Module connected to the TeAx-GPS-Connector (supply of GPS by TCFusionZoom). Via Pin7 GPS_Out the GPS data from an optionally available TeAx-GPS-Module are forwarded to the GPS_In of TCFusionZoom. -
Page 11: Usb2-Port
ThermalCapture Smart+ User Manual 2.2.11 USB2-Port TCSmart+ provides a USB 2.0 port that is ideal to attach a usb hub (e.g. for mouse and keyboard; Bus 02 Port 1 on listing below). It’s fully downward compatible to USB 1.0. ubuntu@ubuntu:$ sudo lsusb -t Bus 03.Port 1: Dev 1, Class=root_hub, Driver=tegra-xhci/2p, 5000M Bus 02.Port 1: Dev 1, Class=root_hub, Driver=tegra-xhci/6p, 480M |__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M... -
Page 12: Power Off
ThermalCapture Smart+ User Manual configured for security. There’s a standard user ubuntu with password ubuntu. On a graphical user session you can just login (with HDMI monitor, keyboard and mouse): • User: ubuntu • Pwd: ubuntu If you want to connect the machine via network theres an SSH service running on TCSmart+. You need the IP address of the TCSmart+ for the SSH session. -
Page 13: Using Libtcfusionzoom
To circumvent this and to make TCFusionZoom accessible by normal users there is an udev rule installed to /etc/udev/rules.d/99- teax.rules. This way the device is attached with the appropriate permissions. ubuntu@ubuntu:$ cat /etc/udev/rules.d/99-teax.rules SUBSYSTEM=="usb", ATTRS{idVendor}=="0483", MODE="0666"... -
Page 14: Using Of Status Led
ThermalCapture Smart+ User Manual 3.5 Using of Status LED The status LED can be freely configured. It’s an RGB LED. Each of the 3 channels can be switched independently by using the appropriate GPIO-Pin of the TCSmart+ (the RGB channels can be combined, e.g. -
Page 15: Post Processing With Thermoviewer Software
ThermoViewer is the post-processing software provided by TeAx Technology to process RAW data captured by TeAx products like TCFusionZoom. It allows the user to quickly browse through recorded data and tune every single frame into the perfect result. For further usage of the data it can be exported into images like JPG and PNG, videos and CSV data. -
Page 16: Disposal And Recycling Information
ThermalCapture Smart+ User Manual 6 Disposal and recycling information You must dispose this device properly according to local laws and regulations. Because this device contains electronic components, the device must be disposed separately from household waste. When this device reaches its end of life, contact local authorities to learn about disposal and recycling options. -
Page 17: Contact
ThermalCapture Smart+ User Manual 7 Contact TeAx Technology UG (haftungsbeschränkt) Hofstädtstr. 8 57234 Wilnsdorf Germany Internet: https://www.thermal-capture.com/ E-mail: support@teax-tec.de WEEE: DE 47 94 44 05 TeAx Technology ©2018 TeAx Technology. All right reserved 17 / 17...