Ce Marking; Compliance With The European Low Voltage Directive; Compliance With The European Emc Directive; Compliance With The European Rohs Ii Directive 2011/65/Eu - ABB ACS560 Hardware Manual

128 Technical data
EN 61000-3-12:2011
IEC/EN 61800-3:2004 +
A1:2012
IEC/EN 61800-5-1:2007
IEC 60664-1:2007

CE marking

A CE mark is attached to the drive to verify that the drive follows the provisions of the
European Low Voltage, EMC RoHirectives.The CE marking also verifies that the drive, in
regard to its safety functions (such as Safe torque off), conforms with the Machinery Directive
as a safety component.
￭

Compliance with the European Low Voltage Directive

The compliance with the European Low Voltage Directive has been verified according to
standard EN 61800-5-1:2007. The declaration of conformity (3AXD10000302784) is available
on the Internet. See section Document library on the Internet on the inside of the back cover.
￭

Compliance with the European EMC Directive

The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800- 3:2004
+ A1:2012) covers requirements stated for drives. See section
61800-3:2004 + A1:2012 (page 129)
on the Internet. See section Document library on the Internet on the inside of the back cover.
￭

Compliance with the European ROHS II Directive 2011/65/EU

The RoHS II Directive defines the restriction of the use of certain hazardous substances in
electrical and electronic equipment. The declaration (3AXD10000302784) is available on
the Internet. See section Document library on the Internet on the inside of the back cover.
￭ Compliance with the European Machinery Directive 2006/42/EC 2nd
Edition – June 2010
The drive is a machinery component that can be integrated into a wide range of machinery
categories as specified in European Commission's Guide to application of the Machinery
Directive 2006/42/EC 2nd Edition – June 2010. The declaration (3AXD10000302783) is
available on the Internet. See section Document library on the Internet on the inside of the
back cover.

Validating the operation of the Safe torque off function

See chapter Technical data (page
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic
currents produced by equipment connected to public low-voltage systems
with input current
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.
below. The declaration (3AXD10000302784) is available
107).
Compliance with the EN