Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Do not return
pump to the store.
Call 1-844-416-9141
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18b
Advertisement
Table of Contents
Related Manuals for Drummond 63407
Summary of Contents for Drummond 63407
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz. CAUTION This pump has been evaluated for use with water only. Page 2 For technical questions, please call 1-888-866-5797. Item 63407...
-
Page 3: Fluid Type
The Pump is designed for use with water with a maximum temperature of 77° F (25°C). Do not use the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products. Item 63407 For technical questions, please call 1-888-866-5797. -
Page 4: Specifications
Irrigation systems. 4. This pump can also be used to transfer water (e.g. household, farming, plumbing). 5. Do not use as a booster pump in a city water system. Page 4 For technical questions, please call 1-888-866-5797. Item 63407... -
Page 5: Installation Instructions
10. The inlet and discharge lines should not be Foot wedged or stressed in a way that puts strain Valve on the pump. Do not support the pump with the inlet or discharge lines. Pump Setup Example Item 63407 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Operation
Once the power cord is falls below its starting pressure. connected, the pump can start at any time. Do not handle or perform maintenance on the pump if the power cord is plugged in. Page 6 For technical questions, please call 1-888-866-5797. Item 63407... -
Page 7: Quarterly Maintenance
Do not get the electrical components wet. Do not expose to freezing temperatures. 4. After storage, check the Impeller to make sure it turns easily and is not oxidized. Item 63407 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Troubleshooting
Follow all safety precautions whenever diagnosing or servicing the pump. Disconnect power supply before service. Do not disassemble the pump or motor as this will damage the water seals. All repairs should be performed by a qualified technician. Page 8 For technical questions, please call 1-888-866-5797. Item 63407... - Page 9 Follow all safety precautions whenever diagnosing or servicing the pump. Disconnect power supply before service. Do not disassemble the pump or motor as this will damage the water seals. All repairs should be performed by a qualified technician. Item 63407 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 63407... - Page 11 Item 63407 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 63407 and is the answer not in the manual?
Questions and answers
How can I order a replacement impeller and O ring for Drummond shallow well pump # 63407 ? Part number 13 and 14.
Hello need help with a Drummon pump
How deep can well be and what size diameter for the well pipe?