Subscribe to Our Youtube Channel
Related Manuals for iBeam TE-4WCM
Summary of Contents for iBeam TE-4WCM
- Page 1 TE-4WCM User Manual iBeamUSA.com MetraDealer.com techsupport@metra-autosound.com � TECH SUPPORT 800-253-8324...
-
Page 2: Table Of Contents
Contents 1. Precautions..................1 2. Features..................3 3. Technical Specifications...............3 4. Accessories..................4 5. Parts Identification................5 6. Remote Control Operation............6 7. Basic Operation................8 8. Menu....................10 9. Recording Time................16 10. Installation Tips................16 11. Troubleshooting................17... -
Page 3: Precautions
1. Precautions ● Storage and Keeping 1. Do not expose the monitor to excessive heat or cold. The storage temperature of this device is -30~+80℃, and the operating temperature is -20~+70 ℃. The humidity is Rh90%. 2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or similar places. -
Page 4: Declaration Of Conformity
● Maintenance 1. Remove all the cable connections from the monitor before cleaning the device. 2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use strong solvents such as thinner or benzine, as they might damage the finish of the device. -
Page 5: Features
2. Features 1. TFT LCD monitor with wide angle view and high resolution display. 2. NORMAL, MIRROR, FLIP and MIR-FLIP viewing available. 3. Split mode, auto-scan mode and single-display mode available. 4. Auto pairing: Auto pairing happens when camera is activated. 5. -
Page 6: Accessories
4. Accessories U-Support Bracket Center Mount Bracket Sun Shield Power cable Angle Adjustment Screws IR Remote control Special Notice Accessory supply may be different for different application. -
Page 7: Parts Identification
5. Parts Identification Digital Color LCD screen Menu Power indicator Remote control sensor Loudspeaker Light level Select channels Press OK button to enter Power switch Volume decrease Volume increase menu item or save user settings. Press OK button - ... -
Page 8: Remote Control Operation
6. Remote Control Operation Press to turn on/off the Press to select MUTE or monitor enable sound Press to show menu or Press OK button to enter menu item or save user exit menu settings. Press OK button - shortcut for start/stop recording. - Page 9 ● MUTE(Mute) Press to select MUTE or enable sound ● POWER(Power switch) Press to turn on/off the monitor. ● OK Press OK button to enter menu item or save user settings. Press OK button - shortcut for start/stop recording. ● MENU Press to show menu or exit menu ●...
-
Page 10: Basic Operation
7. Basic Operation 7.1 Installation of Center Mounting Bracket: ①Adjust monitor level by sliding the support to the desired height. ②Adjust the angle of the monitor and tighten the knob on the center mounting bracket. Support attaching piece Knob 7.2.Installation of U-support Bracket Red wire to positive power supply of DC/10-32V. - Page 11 7.3.Reversing Display: CAM1 7.3.1. When the green wire is activated, the monitor automatically switches to CAM1. 7.3.2. When the white wire is connected to the positive wire of the left turn CAM2 light , the monitor automatically switches to CAM2(left side camera) when the left light is activated.
-
Page 12: Menu
Menu MENU is only allowed for operation under single image mode, not quad mode. ● Press MENU to display the following options and settings: ● 1. MODE 5. AUTOSCAN 2. PICTURE 6. SYSTEM 3. MIR-FLIP 7. PLAY 4. RECORD 8. PAIRING Press to select MODE. - Page 13 (2) Press to select PICTURE. Press OK to enter. Press to select BRIGHTNESS / CONTRACT / HUE / VOLUME, press OK to enter. Press to adjust. Press OK to exit. Press MENU return to main menu. (3) Press to select MIR-FLIP. Press OK to enter. Press to select NORMAL / MIRROR / MIR-FLIP / FLIP.
- Page 14 (4) Press to select RECORD, Press OK to enter Press to select OVERWRITE / FORMAT, press OK to enter. When the icon turns yellow, press to select ON or OFF. Press OK to exit. Press MENU return to main menu. OVERWRITE: Previous video file will be overwritten when disk is full.
- Page 15 Press to select CAM1/CAM2/CAM3/CAM4/SCANTIME,press OK to enter. When the icon turns yellow, press to select or adjust. Press OK to exit. Press MENU return to main menu. No video will be displayed under AUTOSCAN mode if a channel is turned OFF. ...
- Page 16 (7) Press to select PLAY, Press OK enter . Press to select DATE , Press OK to enter. Press to select TIME & CHANNEL, Press OK to enter. ...
- Page 17 (8) Press to select PAIRING, then press OK to enter.Or Press OK for 3 seconds to enter PAIRING. Auto pairing: 1. Choose the channel that needs to be set up, and the monitor display the message “PAIRING START 50” and a counter that counts down 50s. 2.
-
Page 18: Recording Time
9. Recording Time With Micro SD cards in different capacities, please refer to the table below for recording time under 2 different image modes. This table is for reference only. Data may vary under different environments. 128G MODE SINGLE 110h 220h (640x480x1) SPLIT... -
Page 19: Troubleshooting
11. Troubleshooting The symptoms described below do not necessarily mean a failure within the display. Please check the following items before you initiate request for repair. Symptoms Possible Causes/Solutions Improper connection of automobile adapter. Use of un-authorized power supply. No picture, no sound Power switch is on OFF position. - Page 20 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
Need help?
Do you have a question about the TE-4WCM and is the answer not in the manual?
Questions and answers