Table of Contents
Advertisement
Base Unit Illustration
15
Base Unit Controls and Display
1. Base Unit corded handset (Handheld)
2. Speakerphone Speaker (under the Handheld):
a. Voice output during speakerphone operation
b. Rings to an incoming call
c. Distinctive alert sounds indicating various events:
i)
Single short beep: successful key entry
ii)
Double short beep: power on/off
iii)
Triple short beep: : failed operation or invalid key entry
iv)
Single long beep: successful operation
v)
Periodic 1 -long-2-short beep (every 5 minutes): low battery
warning
vi)
Periodic long series of beeps (repeat every 30 seconds):
indicates a call is on-hold
3. Auto Attendant (AA):
a. When enabled (default for all 4 lines), AA will route an
incoming call to a single extension or page a group of
extensions
b. AA can be enabled/disabled separately for each line, the
AA button is lit if AA is turned on for any line
c. Press AA button to access AA functions
4. DND (Do Not Disturb): silent ring on all incoming calls, LED
flashes if DND is turned on
5. Exit: exit menu operation
6. 4-line LCD (Liquid Crystal Display):
a. The LCD display has LED (Light Emitting Diode) for
backlighting
b. The first line of LCD can be used to display either up to 16
characters of status or message, or it can be used to
display Auto Attendant and Voice Mail indicators, as well
as a battery icon:
i)
A shown line number under the Auto Attendant field
indicates Auto Attendant is ON for that line
ii) A shown line number under the Voice Mail field
indicates Voice Mail is ON for that line
iii) During power outage, the backup battery will become
active, and a battery icon will be displayed in the
16
Advertisement
Table of Contents
