Hasee E486 Manual page 23

the power lights blink. When you resume from standby, your work returns
to the screen where you left off.
CAUTI ON : To reduce the risk of information loss, save your work before
initiating standby.
Hibernation
CAUTI ON : If the configuration of the computer is changed during
hibernation, resuming from hibernation may not be possible. When the
computer is in hibernation: Do not connect the computer to or disconnect
the computer from an expansion product. Do not add or remove memory
modules. Do not insert or remove any hard drives or optical drives. Do not
connect or disconnect external devices. Do not insert or remove an external
media card, such as a MultiMediaCard.
Hibernation saves your work to a hibernation file on the hard drive,
and then shuts down the computer. The power lights are turned off. When
you restore from hibernation, your work returns to the screen where you
left off. If a power-on password has been set, the password must be
entered to restore from hibernation.
CAUTI ON : To reduce the risk of information loss, save your work before
initiating hibernation.
You can disable hibernation. However, if hibernation is disabled and
the system reaches a lowbattery condition, the system will not automatically
save your work while power is on or when standby has been initiated.
Initiating standby, hibernation or shutdown
The following sections explain when to initiate standby or
hibernation and when to shut down the computer.
22