Lexus NX300h Owner's Manual page 205

WARNING
When a compact spare tire or an
●
emergency tire puncture repair kit is
used
● If equipment (snow plow, etc.) that may
obstruct the radar sensor or camera
sensor is temporarily installed to the
vehicle
Changing settings of the pre-col-
lision system
Enabling/disabling the pre-colli-
■
sion system
The pre-collision system can be
enabled/disabled on the multi-informa-
tion display as following:
The system is automatically enabled each
time the power switch is turned to ON
mode.
1 Press " " or "
trol switches and select
2 Press " " or "
trol switches and select
press .
3
Press " " or "
trol switches and select "PCS", and
press to select the desired set-
ting (on/off).
If the system is disabled, the PCS warn-
ing light will turn on and a message will
be displayed on the multi-information
display.
LEXUS NX300h
al_USA_OM78212U
4-5. Using the driving support systems
" of meter con-
.
" of meter con-
, and
" of meter con-
Owners Manu-
Changing the pre-collision warn-
■
ing timing
The pre-collision warning timing can
be changed on the multi-information
display as following:
The operation timing setting is retained
when the power switch is turned off.
1
Press " " or " " of meter con-
trol switches and select
2 Press " " or " " of meter con-
trol switches and select
press .
3
Press " " or " " of meter con-
trol switches and select "Sensitiv-
ity", and press to select the
desired setting.
205
4
.
, and