132
3-3. Adjusting the seats
Luggage room switch
2
Check that the plate for the seat
belt is on the front side of the seat.
When using the seat belt for the rear cen-
ter seat (→P.29)
Operating conditions for folding down
■
the seatback (power seat)
When the following conditions are met,
switch operations are possible.
When operating the rear seat switch: The
●
seatback position is within the
in the illustration from the most upright
position.
When operating the instrument panel
●
switch or luggage compartment switch:
The seatback position is within the
LEXUS
NX300h
al_USA_OM78212U
range
A
B
Owners
Manu-
range in the illustration.
When operating the rear seat switch:
●
When the rear door for the seat to be
operated is open.
●
When operating the luggage compart-
ment switch: When the back door is
open.
When the other operation switches for
●
the seat being operated are not pressed.
When the power switch is in ON mode, in
addition to the above, the power seat oper-
ates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
Operating conditions for returning the
■
seatback (power seat)
When the following conditions are met,
switch operations are possible.
When operating the rear seat switch: The
●
seatback position is within the
in the illustration from the most upright
position.
●
When operating the rear seat switch:
When the rear door for the seat to be
operated is open.
When operating the luggage compart-
●
ment switch: When the back door is
open.
●
When the other operation switches for
the seat being operated are not pressed.
When the power switch is in ON mode, in
addition to the above, the power seat oper-
ates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
A
range