Table of Contents
Advertisement
WARNING:
or missing, DO NOT attempt to plug in the
power cord or operate the blower until the
broken or missing part is replaced.
Failure to do so could result in possible
serious injury.
WARNING:
modify this blower or create accessories
not recommended for use with this blower.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
injury.
WARNING:
starting that could cause serious personal
injury, always remove the battery pack
from the blower when assembling parts.
UNPACKING
1. Carefully remove the tool and any
accessories from the box. Make sure
that all items listed in the packing list
are included.
2. Inspect the tool carefully to make sure
no breakage or damage occurred during
shipping.
3.
Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
CONTENTS
Blower, blower tube and Operator's Manual.
ASSEMBLY
If any part is broken
Do not attempt to
To prevent accidental
ASSEMBLING/DISASSEMBLING
THE BLOWER TUBE
(FIG. 2A & 2B)
Before assembling the blower tube, be sure
the on/off switch is in "O'' Off position.
FIG. 2A
Tube release
button
Rear blower tube Front blower tube
FIG. 2B
Tube release button
First, connect the two blower tubes as
shown in FIG. 2A, and then fit the assembled
blower tube to the motor housing as shown
in FIG. 2B. Check that the blower tube is
firmly secured.
Before disassembling the blower tube, be
sure the on/off switch is in "O" Off position.
Push the tube release button downwards to
detach the tube. Do not try to separate the
tubes by force or by using tools.
Page 8
Advertisement
Table of Contents
