Operation; Starting And Stopping - MasterForce FlexPower 241-0443 Operator's Manual

Cordless blower
Table of Contents

Advertisement

STARTING AND STOPPING

(FIG. 3)
FIG. 3
Starting
Move the On/Off switch to the "I" position to
turn on the blower.
Move the On/Off switch to the "II" position
for "high" power.
Stopping
Move the On/Off switch to the "O" position
to turn off the switch.
WARNING:
seconds after it has been switched off.
Let the motor come to a complete standstill
before setting the tool down.
Page 9

OPERATION

The tool runs for a few
USING THE BLOWER (FIG. 4)
FIG. 4
The blower is intended for residential use
only. Use the blower outdoors to move
debris from hard surfaces. This blower
is not designed to clear leaves from large
grassy areas, or to move wet, heavy debris.
OPERATING TIPS
Hold the blower tube approximately 7"
above the ground when operating the
tool and use a sweeping motion from
side to side. Advance slowly, keeping
the accumulated debris/leaves in front of
you (Fig. 4).
After blowing the debris/leaves into a pile,
it is easy to dispose of the pile.
CAUTION:
objects such as nails, bolts, or rocks. Do
not operate the blower near bystanders or
pets. Use extra care when cleaning debris
from stairs or other tight areas.
Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Do not blow hard

Advertisement

Table of Contents
loading

Table of Contents