Cd, Radio & Aux; Loading A Cd; Playing A Cd; Programming A Cd - iLive IHB613B User Manual

CD, Radio & Aux In

Loading a CD

Note: This unit is not compatible with MP3 CDs.
1. Open the Disc Door.
2. Place a CD into the unit, label side facing up.
3. Close the Disc Door.

Playing a CD

1. Follow the instructions for Loading a CD.
2. Press the Source button to switch to CD mode.
3. Press the Play/Pause button to begin playing the
loaded CD.

Programming a CD

1. Follow the instructions for Loading a CD and
Playing a CD.
2. Press the Stop button to stop the CD during play.
3. Press the Program button on the remote.
4. Use the Skip/Search buttons to enter the desired
track number.
5. Repeat step 3 until the desired number of CD tracks
are programmed.
6. Press the Play/Pause button on the remote to
begin playing the programmed tracks.

Playing the Radio

1. Press the Source button to switch to FM Radio
mode.
2. Press the Tune+/- buttons to tune the radio. Press
and hold to search for the next available station.

Radio Reception

This unit features an internal FM radio antenna. Adjust
the position of the unit to improve FM radio reception.
Customer Support: 1-888-999-4215

Saving a Radio Station as a Preset

1. Follow the instructions for Playing the Radio.
2. Press and hold the Memory button on the remote
or the unit.
3. Press the Tune+/- buttons on the remote to select
a preset number.
4. Up to 20 stations may be preset.
5. Press the Memory button to save the current
station to the selected preset.

Tuning to a Saved Preset Station

In FM Radio mode, press the Repeat/Mem+ button to
cycle through saved presets.

Using the Aux Input

Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the 3.5mm Audio
Input and the audio output on an MP3 player or
other audio device.
2. Press the Source button to switch to Aux In mode.
3. Use the native controls on the connected MP3
player or other audio source to play your audio
through the unit.
AUX IN R L
SPEAKER
AC IN ~
9