Special Functions - Sanyo C20PE70 Instruction Manual

Special Functions
You can set the special functions by inputting the special codes using the RECALL@ key and the Programme Selectorm
of the remote control transmitter.
Special codes and special functions are as follows
S::px$l
Special functons
SP 00
Reset all special functions (The start condition for the TV power is changed to the standby start).
SP 01
Reset all special functions.
SP 30 Cancellation special code "31".
SP 31 Maximum volume level setting and prohibition of channel tuning function.
SP 40 Setting of the startup condition for the lV programme.(Always switched on in previous programme position)
SP 41
Setting of the startup condition for the TV programme. (Always switched on in programme position"1" )
SP 42 Setting of the startup condition for the TV programme. (Always switched on in programme position"2 )
SP
43 Setting of the startup condition for the TV programme. (Always switched on in programme position"3 )
SP
44 Setting of the startup condition for the TV programme. (Always switched on in programme position "4" )
SP
45 Setting of the startup condition for the TV programme. (Always switched on in programme position "5" )
SP
46 Setting of the startup condition for the TV programme. (Always switched on in programme position "6" )
SP
47 Setting of the statt up condition for the TV programme. (Always switched on in programme position "7" )
SP
48 Setting of the startup condition for the TV programme. (Always switched on in programme position"8 )
SP 49 Setting of the startup condition for the TV programme. (Always switched on in AV mode)
SP
50 Change of the start condition for the TV power (Setting to the standby start).
SP 51
Change of the start condition for the TV power (Setting to the normal statt).
SP 60 Cancellation special function 61.
SP 61 Suppression of the auto shut off function.
Note: Special functions are not cancelled when the power is turned off or when the AC power plug is disconnected from
the mains.
h
I Example: To input special code "49"
(The input method is the same for all the special codes.)
(1) Press and hold the RECALL @ key for more
than 3 seconds.
EtaT
d
:wv.:.:.:.:.:.:.:.:
ytw:A.:.:.:.:.:.:.:.
:(—]:
......... . .... ...,,
..:.".".".".".'.+
::::wiM:,:,
","." ........
................
w-...:
~RECALL
LI"EI
fi2)
Press" 4" key, next press" 9" key.
:.::ti:sv:~:::~
"~A::~
f-%-————a ,.,.,
,.,..
m
L
SP49
(3) Press MEMORY/PRESET ~button of the TV set.
-9–