Sanyo C20PE70 Instruction Manual page 7

General Operation
Should you wish to mute the sound (e.g. While talking on
the telephone), press the SOUND MUTE @ key.
@SOUND MUTE
A SOUND MUTE
111111 ---------
To switch the sound back on,
press SOUND MUTE key again.
The TV set will be turned off after about 30, 60, 90 or 120 minutes.
Press the OFF TIMER ~ key.
l--+
No off timer
4
I
l-,()+
After 30 minutes
k
After 60 minutes
I I
I Q Tp°FFT'MER
After 120 minutes After 90 minutes
~
Just one minute before switching off the TV, " – 01"
To cancel the OFF TIMER
and channel number will be displayed on the
Press the OFF TIMER key until" – –" appears.
I
1 I I
This function lets you store the settings (for colour, brightness, contrast, sharpness, sound volume)in memory for both
picture and the sound, and these setting levels can be recalled by pressing the NORMALIZATION @ key of the remote
control transmitter.
To store the picture and sound settings
(1)Set the picture and sound to the desired levels. —>
A SOUND
111111 ---------
etc.
1 m
(2) Press the MEMORY/PRESET 0 Q button while the control function display is still visible on the screen.
NOTE: The control settings will not be saved if the MEMORY button is pressed after the control function display has
left the screen.
W
..,.,.,
.:.:
,.
F@ +.+ w= P*P
m o
@
~kd
Press the NORMALIZATION @ key.
m
The colour, brightness, contrast, sharpness and
NORMALIZATION
sound volume settings which you stored using the
MEMORY button are recalled.
–7–