Installing The M.2 Solid State Drive - Ssd; Wlan Card; Removing The Wlan Card - Dell Vostro 5370 Owner's Manual

Installing the M.2 Solid State Drive — SSD
1 Align the notch on the solid-state drive with the tab on the solid-state drive slot.
2 Slide the solid-state drive into the slot.
3 Replace the M2.0 x 3 screw to secure the SSD to the system.
4 Install the base cover.
5 Follow the procedure in

WLAN card

Removing the WLAN card

1 Follow the procedure in
2 Remove the base cover.
3 To remove the WLAN card:
a Remove the M2.0 x 3 screw that secures the WLAN card to the system [1].
b Remove the tab that secures the WLAN cables [2].
c Disconnect the WLAN antenna cables from the WLAN card [3].
d Lift the WLAN card away from the connector [4].
After working inside your computer.
Before working inside your computer.
Removing and installing components 15