Page 2
A064 Assembly Procedure 2. CAUTIONS I. Flashing & Servicing must be undertaken by qualified personnel only. II. Ensure all work is carried out at an anti-static workstation and that an anti-static wrist strap is worn. III. Use only approved Tools & components as specified in the parts list.
Page 3
A064 Assembly Procedure (2) Solder the Motor/Speaker/MIC in turn, and the soldering direction as indicated by the arrows. Soldering Motor Soldering MIC Soldering Speaker (3) Stick the rear camera and side key soldering joints Mylar on the back of PCBA as shown.
Page 4
A064 Assembly Procedure (4) Stick the Speaker gum on the back of PCBA(Aimed at silk-screen). Speaker Gum (5) Soldering LCD FPC, need to aim at silk-screens. Solder LCD FPC...
Page 5
A064 Assembly Procedure (6) Tear off the release paper of LCD gum, get through the LCD to the front side from the back of A cover, and put LCD in A cover. Tear off the release paper of LCD gum...
Page 6
A064 Assembly Procedure (7) Assemble the mainboard to A cover, lock the mainboard by 2pcs screws (ST1.4*2.5) to; assemble Speaker (wrapping the wires five circles), arrange the wires close to speaker. Assemble MIC, side key FPC(Tear off the release paper of gum),pay attention to align at the silk-screen of mainboard.
Page 7
A064 Assembly Procedure (9) Tear off the back release paper of CTP IC, assemble CTP FPC to ZIF connector, and press it gently to stick on mainboard. (10) Stick the mylar on ZIF connector, wrap the motor wires for three circles. Tear off release paper of motor, aim at silk-screen of mainboard, and stick on the shielding case.
Page 8
A064 Assembly Procedure (11) Assemble B cover, button up B cover to A cover, press the lock catch into A cover. (12) Push the six screws (ST1.6*4.5) as shown.
Page 9
A064 Assembly Procedure (13) Assemble the lens of rear camera, press it to the gum. (14) Assemble the battery cover. Thanks For any Query or suggestion, Please write to tech.help@micromaxinfo.com...