Revision History - Sony Ericsson W710 Installation Instruction, Electrical

Because of cost and space limitations, some repair centers may not be able to assign a
full bench to lead-free repairs. In this case, both lead-free and leaded repair setups can
share the same bench, but they must be clearly marked with signs and separated by a
physical divider. In the figure below, the large hot air device functions as the divider.

7 Revision History

Rev.
A
B
1/000 21-2/FEA 209 544/601 B
©
Sony Ericsson Mobile Communications AB
Date Changes / Comments
2006-08-25 Initial Release
2006-10-12 Added USB Activation Dongle, service card reader, and
service card
Installation Instruction, Electrical
10(10)