Lumibrite; After-Sales Service; Troubleshooting; Notes On Guarantee And Repair - Seiko Issey Miyake NE15 Instruction

LUMIBRITE

If your watch has Lumibrite
Lumibrite is a luminous paint that absorbs the light energy of the sunlight
and lighting apparatus in a short time and stores it to emit light in the dark.
For example, if exposed to a light of more than 500 lux for approximately
10 minutes, Lumibrite can emit light for 3 to 5 hours.
Please note, however, that, as Lumibrite emits the light it stores, the lumi-
nance level of the light decreases gradually over time. The duration of the
emitted light may also dier slightly depending on such factors as the
brightness of the place where the watch is exposed to light and the dis-
tance from the light source to the watch.
※ In general, when coming from a place that is bright to a place that is dark, it takes hu-
man eyes some time to adapt to the darkness making it dicult to see objects initially.
(Dark adaptation)
※ Lumibrite is luminous paint that stores and emits light, which is harmless to human be-
ings and the environment, containing no toxic materials such as radioactive substances.
Condition
Fine weather
Sunlight
Cloudy weather
Indoor Fine weather
(Window-sideduring Cloudy weather
daytime) Cloudy weather
Lighting apparatus Distance to the watch: 1m 1,000 lux
(40-watt daylight Distance to the watch: 3m 500 lux (average room luminance)
fl uorescent light) Distance to the watch: 4m 250 lux
42
■ Inspection and adjustment by disassembly
and cleaning (overhaul)
・ Periodic inspection and adjusment by disassembly and
cleaning (overrhaul) is recommended approximately once
every 2 to 3 years in order to maintain optimal performance
of the watch for a long time. According to use conditions,
the oil retaining condition of your watch mechanical parts
may deteriorate,abrasion of the parts due to contamination
of oil may advance or delay the time significantly, or the
watch itself may stop. As parts such as a gasket may dete-
riorate, water-resistant performance may be impaired due
to intrusion of perspiration and moisture. Please contact the
retailer from whom the watch was purchased for inspection
and adjustment by disassembly and cleaning (overhaul). For
replacement of parts, please specify "SEIKO GENUINE
PARTS." When asking for inspection and adjustment by dis-
assembly and cleaning (overhaul), make sure that the gas-
ket and push pin are also replaced with new ones.
・ When your watch is inspected and adjusted by disassem-
bly and cleaning (overhaul), the movement of your watch
may be replaced.
44
Illumination
100,000 lux
10,000 lux
more than 3,000 lux
1,000 to 3,000 lux
less than 1,000 lux

AFTER-SALES SERVICE

■ Notes on guarantee and repair

・ Contact the retailer the watch was purchased from or a
SEIKO CUSTOMER SERVICE CENTER for repair or overhaul.
・ Within the guarantee period, present the certificate of
guarantee to receive repair services.
・ Guarantee coverage is provided in the certifi cate of guar-
antee. Read it carefully and retain it.
・ For repair services after the guarantee period has expired, if
the functions of the watch can be restored by repair work,
we will undertake repair services upon request and payment.
■ Replacement parts
・ SEIKO makes it a policy to typically keep a stock of replace-
ment parts for this watch for 7 years. Replacement parts
are those which are essential for maintaining the functional
integrity of the watch.
・ When repairing your watch, please keep in mind that if origi-
nal parts are not available, parts may be replaced with sub-
stitutes whose outward appearance may differ from the
originals. Also note that the complete set of parts with the
case or band may be replaced, or if repair is difficult, the
watch may be replaced with one of equal quality.

Troubleshooting

Problem Possible cause
The watch stops The watch is not wound up
operating. suffi ciently.
The watch gains/ T h e w a t c h h a s b e e n l e f t
loses temporarily. i n e x t r e m e l y h i g h o r l o w
temperatures for a long time.
The watch was brought into
close contact with a magnetic
object.
You dropped the watch, hit it
against a hard surface or wore
it while playing active sports.
The watch was exposed to
strong vibrations.
T h e w a t c h h a s n o t b e e n
overhauled for more than 3
years.
The date changes AM/PM is not properly set.
a t 1 2 o ' c l o c k
noon.
T h e g l a s s i s Water got inside the watch
blurred and the due to the deterioration of the
blur persists for a gasket, etc.
long time.
※ For the solution of troubles other than listed above, contact the retailer from
whom the watch was purchased.
43
Solution
Turn the crown or swing the watch to
wind it up. The watch will start operating.
If the watch not, consult the retailer from
whom the watch was purchased.
The normal accuracy will resume when
the watch returns to normal temperature.
The normal accuracy will resume when
the watch is kept away from close
contact with the magnetic source.
If this condition persists, consult the
retailer from whom the watch was
purchased.
The normal accuracy will not resume.
Consult the retailer from whom the watch
was purchased.
Consult the retailer from whom the watch
was purchased.
Advance the hands by 12 hours.
Consult the retailer from whom the watch
was purchased.
45