Advertisement
1.0 TECHNICAL SPECIFICATION
Factory Service Mode (FSM)
Procedure to change region code of your DVD
Portable
1. Power on the DVD player and do not insert
DISC inside player
2. Setup->Prefer
Press IR in the sequence as
9 -> 6 -> 5 -> 3
The LCD display showed the existing region
code.
3. Press
(navigation up) or
down) repeatedly to select the number from 0
to 6.
4. Then press OK to confirm your region code.
5. Refer below table for your region code setting
Select "0" setting = Region Free (confidential)
Procedure for SW upgrade
1. Download the "PHILIPS.BIN" file from the
Philips support site
2. Power on PET739 with AC/DC adapter
3. Insert the USB drive to USB port of the main
set
4. The set will detect the upgraded SW
5. Press "OK" to confirm and proceed
6. The set will reset once finished upgrade
Warning: Do not unplug the AC adapter
during firmware upgrade to prevent flash
corrupt of the set!!
Procedure to check SW version of your DVD
Portable
1. Setup-> General
Press IR in the sequence as
3->3->0->8
,then a menu will be show Year-month-Day.
(navigation
Advertisement
