1.2 Normal Care 2. Do not use the car charger in a wet environment. When The NavRoad NR430BT is constructed of high quality materials hands and feet are wet, do not touch the car charger. and does not require user maintenance other than cleaning.
(such as in the trunk of a car), as permanent damage may result. - To avoid theft, do not leave your NR430BT in plain sight when Caring for the Touch Screen you leave your vehicle.
Chapter 2 Product Information 2.1 Package Contents Please check the contents in the Box. SD card with navigation software Manual and maps *depends on version...
5. Plug the car charger into your vehicles cigarette lighter or 12 volt receptacle. 6. Installation is complete, and you are ready to turn the Take care when mounting the NavRoad NR430BT in your vehicle, NavRoad NR430BT on and go. whether using the windshield mount or other mount, that it does not obstruct the driver’s view of the road.
Follow the instructions on the Installation Poster to dock your Basic Operations NavRoad NR430BT in your car. The first time you turn on your NavRoad NR430BT, it may take up to 10 seconds to start. To power off your NavRoad NR430BT, pull down the bar switch.
Understanding Hardware Components Component Description Display each menu screen and 1. Main Unit return to the previous mode. Menu Button Front, Left and Top Side Components. For Hold function, please press Return key more than 2 seconds. This is 5 way joysticks for 5 Way Joystick navigation and select menu.
Page 9
Rear, Right and Bottom, Side Components. Component Description Power Button Turns on and off the device. SD Slot Accepts a SD card for accessing date such as MP3 music. External Antenna This Connector(under rubber dust Connector cover) allows use of an optional external antenna with...
Page 10
Docking Port This port should be connected Front, Rear and Inner Side Components. the NavRoad device Push Button This button working disconnect with NavRoad Device DC Input DC 5V input TMC Connector TMC(Traffic Message Channel) module for receiving TMC information.
3. If prompted to enter the pincode (or passkey) on your mobile phone, tap the passkey specified by the NavRoad NR430BT (dhe default is 1234) and tap OK. 4. You will see the Phone main screen after the pairing is completed.
The next time you run the Phone program, your device will automatically search and pair with one of the last connected mobile phones. NOTE: • Your device must be in Pair Mode for the mobile phone to discover your device. If you need to manually set your device to Pair Mode, tap Pair Mode on the Phone main screen.
Call History Redial Tap the Call History button on the Phone main screen to display the recent incoming, outgoing, or missed calls Tap the Redial button on the Phone main screen together with information such as date, time, and duration of to dial the last number you called or received.
Page 14
number, tap to open the keypad and tap the digits. The keypad will close when you tap the button again or when there has been no input for 5 seconds. • T ap to mute your sound so that the other party cannot hear you.
By tapping the Connect button on the Phone main screen, you 4. When prompted to enter the passkey in your mobile can manually search the last paired mobile phones for an phone, Please, input the passkey requested by the NavRoad available connection. and tap OK.
3.3.7 Pair Mode By tapping the Pair Mode button on the Phone main screen, you can manually set your device to Pair Mode. Within the duration for 4 minutes, you can initiate the pairing process on your mobile phone to discover your device as a hands-free device or a Headset.
The available options are: • H ome Number : Allows you to edit the your home number. • A uto-Answer : You can tell your NR430BT to answer every call automatically after a certain time. • R ing-Tone : You can select one ring tone from 3 kinds of...
Page 18
Tap the Music button on the Main menu to start the program. 2. Tap the Music button on the Home screen to start the The control panel appears on the screen where you can easily program. control the player by tapping the control buttons. 3.
Page 19
3.4.4 MP3 Playback Controls Exit Close the program and return Control Button Name Description to the Play/Pause Play or Home pause the screen. playback. Playback Cycle Stop Stop the Mode through the playback. following modes: Repeated RWD/F.FWD Play playback of Rewind or the all files Fast...
3.5 Photos 3.5.1 Starting and Exiting Photos 3.5.4 Viewing a Picture in Full Screen Photos allows you to view pictures in JPEG, GIF and BMP formats and view the Tap the Photos button on the Main menu When you tap or a picture once in the list view, the to start the program.
3.6 Movie Before using the program, have the Movie files ready on a storage card. 3.6.1 Starting and Exiting Movie Player 3.6.3 Playing Movie Files Movie turns your device into a Movie player. It features: 1. If your files are in a storage card, insert the card into Playback of Movie files your device.
Volume -/+ Increase or When you tap or Movie screen once in the Movie decrease player view, the Movie is played in full screen. the volume. To go back to the Movie screen, tap anywhere on the screen to indicator on view screen.
Page 23
To exit Settings, tap The following sections describe the various buttons and their functions. 3.7.3 Start Settings 1. Tap the Settings button on the Main menu. 2. Tap the Start Settings button. 3.7.2 Information 1. Tap the Settings button on the Main menu. 2.
Page 24
Then you can select the application from the list and tap OK to confirm. To select the application which will run when swithing on the device, tap Start with Specific Application. You can choose from standard applications by tapping their appropriate icon. 3.
3.7.4 Default Settings darken the backlight, move the knob to the left. To lighten the backlight, move the knob to the right. 1. Tap the Settings button on the Main menu. 2. Tap the Default Settings button. 3.7.6 Change Language 3.
- automatically dim the LCD display when it is idle for a set period of time. 4. Tap OK the button for the new setting to take effect(Re- booting). 3.7.7 Energy 3.7.8 Touch Screen To check the remaining power level of your battery and/or set up the power saving feature: You can calibrate the touch screen if it is not responding accurately to your taps.
Page 27
5. When the target moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration process. 6. When completed within 5 seconds, tap no. 6. 3.7.9 Date/Time settings To set Date, Time and Timezone tap the time display at the upper right corner of the display.
The products operating temperature is between 0 C - +40 please do not operate under extreme temperatures. 4.2 Registration Please make sure to register your NAVROAD NR430BT at Avoid exposure to sunlight www.navroad.com. By registering, you will be informed of the latest product updates.
Page 29
Using the stylus 1. Connect adapter, restart system. The LCD screen is easily scratched; please use only the stylus for 2. Reset system. operation. Do not use any other sharp objects on the screen to avoid damaging the LCD screen. Display speed is too slow 1.
Docking station connectors: TMC antenna External microphone External speakers Chapter 5 Charger Fact Sheet Dimensions (W x H x D): 131.0 x 81.6 x 23.6 (mm) Weight: 230g 5.1 Product Specification Samsung S3C2442, 400 MHz Memory 64 MB ROM, 64 MB RAM Memory expansion SD card socket ®...
Page 31
The user could lose the authority to operate this equipment unauthorized change modification is made. * CE USER INFRMATION Hereby, WIDER Corp., Declares that this Bluetooth(M/N: NR430BT) is in compliance with the essential requirements and other Reievant provisions of Directive 1999/5/EC.