P&M Aviation QUIK GT450 Operating Instructions Manual page 4

This product has been manufactured for use in a
reasonable and prudent manner by a qualified
operator.
The minimum qualification for flying this aircraft is a
formal certificate or license following successful
completion and assessment of the BMAA flexwing
microlight
Weight-Shift
authorization from a qualified Instructor whilst
training for your License or certificate. In addition, it
is your personal responsibility to ensure that you are
qualified to fly in the state/country where you intend
to operate the aircraft.
For your personal safety, the safety of others and the
safe operation of the aircraft, it is very important that
this operator's manual is read in full before operating
or flying the aircraft for the first time, and that the
relevant
trimming or maintenance work is undertaken.
Should you not understand any of the Aviation terms
to be found in this manual, then ask your instructor
for clarification.
If you have just acquired this aircraft then it is
important
owner/operator with your nearest P&M Aviation
Distributor, or with P&M Aviation direct at the
following address:
Quik & Quik GT450 Aircraft Operating Instructions
th
29 March 2007
Issue 1
NOTICE
syllabus, Sport Pilot
Control or
sections are understood
that you register
P&M Aviation Ltd
Unit B,
Crawford St,
Rochdale
Lancashire
OL16 5NU
Great Britain
www.pmaviation.co.uk
flying@pmaviation.co.uk
WARNING
!
Failure to register will mean that you may
not get important safety information issued
by the company in support of its products.
Certificate for
equivalent, or under
before any
as the new
Page 4 of 68