Download  Print this page

Troubleshooting - Philips DVP3688MK2 User Manual

Hide thumbs

Advertisement

Audio
2-channel analog output
Front L&R : 2 Vrms (47k Ohm)
5.1-channel analog output
Front L&R : 2 Vrms (47k Ohm)
Center: 2 Vrms (47k Ohm)
Subwoofer: 1.15 Vrms (47k Ohm)
Rear L&R: 2 Vrms (47k Ohm)
Digital output: 0.5 Vp-p (75 Ohm)
Coaxial
HDMI output
Sampling frequency:
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 8 kbps - 320 kbps
WMA: 32 kbps - 192 kbps
Main unit
Dimensions (W x H x D):
310 x 39.5 x 210 (mm)
Net Weight: 1.04 kg
Power
Power supply rating: 110- 240V~, 50-60 Hz
Power consumption: 11 W
Power consumption in standby mode:
< 0.5 W
Accessories supplied
Remote control and two batteries
HDMI cable
Audio/Video cables
User Manual
Laser specification
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Wave length: 658 nm (DVD),
790 nm (CD)
Output Power: 7.0 mW (DVD),
10.0 mW (VCD/CD)
Beam divergence: 60 degrees
16
EN

5 Troubleshooting

Warning
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
No picture.
The TV video input channel is not correctly
selected (see the TV's user manual).
If you have changed a TV system setting,
switch back to the default setting:
1) Press to open the disc compartment.
2) Press SUBTITLE.
No picture on HDMI connection.
If this player is connected to an
unauthorized display device, the audio/
video signal cannot be output.
If the HDMI cable is faulty, replace it with a
new HDMI cable.
If you have changed the setting for HDMI
video resolution, switch to its default mode.
No sound output from the TV.
Make sure that the audio cables are
correctly connected between this player
and the TV.
No sound on HDMI connection.
If the connected device is non-HDCP
compliant or only DVI-compatible, no
sound can be heard from the HDMI
output.

Advertisement

Table of Contents

   Related Manuals for Philips DVP3688MK2

Comments to this Manuals

Symbols: 0
Latest comments: