Advertisement
DISASSEMBLY INSTRUCTIONS
Dismantling the DVD Module
1) Loosen 2 screws "A" at both sides as shown in gure 1 & remove 6 screws "B" as shown in gure 2 to remove top & side cover
A
gure 1
2) Push the gear slowly towards the front as shown in gure 3 until the DVD tray move out of the front cabint. now the DVD tray is
disengaged and can be pulled out completely.
3) Remove the cover Tray as shown in gure 4.
4) Loosen the 4 screw "C" as shown in gure 5 to remove DVD loader bracket
5) Loosen the 4 screws "D" at DVD loader as shown in gure 6
gure 3
3 - 1
gure 2
gure4
C
gure 5
Dismantling the Power Board
1) Loosen 4 screws "D" on the top of board as shown in gure 7
3 - 1
D
gure 6
E
gure 7
Advertisement
