Connecting The Rj-11 / Rj-45 Ports - netsys NV-720S User Manual

2.5 Connecting the RJ-11 / RJ-45 Ports

The line port has 1 connector: RJ-11 . It is used to connect with NV-700L (CO) using a single pair phone cable to NV-720S (CPE)
bridge side (point to point solution).
Figure 2.1 NV-720S line ports straight connection
NV-720S ADSL2+/VDSL2 Wi-Fi USER'S MANUAL Ver. A.2
(Figure 2.1).
Notes:
1.
2.
3.
4.
11
When inserting a RJ-11 plug, make sure the tab on the plug
clicks into position to ensure that it is properly seated.
Do not plug a RJ-11 phone jack connector into the Ethernet
port (RJ-45 port). This may damage the router. Instead, use
only twisted-pair cables with RJ-45 connectors that conform
to Ethernet standard.
Be sure each twisted-pair cable (RJ-45 Ethernet cable)
does not exceed 100 meters (333 feet).
We advise using Category 5~7 UTP/STP cables for
making Bridge or Router connections to avoid any
confusion or inconvenience in the future when you attach
high bandwidth devices.
Use 24 ~ 26 gauge twisted pair phone wiring, we do not
recommend 28 gauge or above.
Be sure phone wire has been installed before the
NV-720S boot.