Motorola Piccolo-XR Owner's Manual page 20

Installation
Installation of an Internal Battery
1. Release the screw at the top of the battery chamber
door, and slide the door out, as shown in Figure 10.
2. Connect the 9V battery cable (FKN8204B) to the DC
power input connector on the back of the unit.
3. Connect the 9V DC battery to the cable.
4. Place the 9V DC alkaline battery in the chamber as
shown in Figure 10.
Close the battery chamber door and secure with the
5.
screw.
Screw Battery
Chamber Door
Figure 10
PIU Battery Chamber
14
Battery
Chamber
Battery