Motorola Piccolo-XR Owner's Manual page 19

Power Connection
The PIU can be powered by various types of supply sources:

Internal (9VDC) battery;

External 6V or 12V DC battery;

Motorola power supplies – controllers. For example:
IRRInet XL, IRRInet XM, IRRIcom, MOSCAD;

24VAC.
The unit DC voltage range is 6 to 16 volts.
NOTE!
9VDC Internal Battery
Incorrect replacement of the battery can result in
!
explosion! Replace only with the same or with an
equivalent type of battery recommended by the
C a u t i o n
manufacturer.
Dispose of used batteries according to the battery
manufacturer instructions.
Place a standard 9VDC alkaline battery (not supplied) into the
PIU battery chamber (see Figure 10). Battery operation is
applicable when operating the unit in a non-radio mode, e.g.
when the PIU is used as an adapter.
Installation
13