Subscribe to Our Youtube Channel
Related Manuals for PORTMAN P3 PIX3L
Summary of Contents for PORTMAN P3 PIX3L
-
Page 1: User Manual
™ custom lights P3 PIX3L USER MANUAL portmanlights.com /PortmanCustomLights © Portman Lights sp. z o.o. Designed and made in oland, EU... -
Page 2: Welcome
Welcome! Dear User, Thank you for choosing our P3 PIX3L. We are proud of delivering you the highest quality, the greatest design and the real passion with our product. Each fixture in Portman P range is different, but all of them ensure you the best performance and support your creativity. -
Page 3: Table Of Contents
USER MANUAL – Portman Custom Lights P3 PIX3L Table of contents Welcome! ..............................2 Table of contents ............................. 3 Safety information ........................... 4 Technical specification ..........................6 Fixture Overview ............................7 Preparation for use ..........................9 Lamp and fuse replacement ........................11 Portman Spinner ............................ -
Page 4: Safety Information
This product is for professional use only! It is not for household use. P3 PIX3L presents risk of lethal or severe injury due to heat, electric shock, fire or falls. Intense and flashing light could trigger epileptic seizures. Read this manual before your initial start-up and follow the safety information in this manual and engraved on the fixture. - Page 5 Do not mount more than 7 fixtures per single structure build with Portman Spinner. • When building a structure with Portman Spinners ensure that each fixture is connected to at least two Portman Spinners and whole structure is attached to mounting surface with at least two clamps.
-
Page 6: Technical Specification
USER MANUAL – Portman Custom Lights P3 PIXEL Technical specification 404 x 455 x 212 mm dimensions 3,5 kg weight 240V 50Hz/60Hz input voltage 730W (940W max ) power consumption 230W R7s 118mm (max 300W) light source F 2.0A channel fuses... -
Page 7: Fixture Overview
USER MANUAL – Portman Custom Lights P3 PIX3L Fixture Overview Dimensions chart... - Page 8 USER MANUAL – Portman Custom Lights P3 PIXEL DMX Value function DMX channel 0 – 255 0 - 100% smooth dimming CH.1 0 – 255 0 - 100% smooth dimming CH.2 0 - 255 0 - 100% smooth dimming CH.3 Kit contents •...
-
Page 9: Preparation For Use
Preparation for use AC power connection The Portman Custom Lights P3 PIX3L must be installed at 200-240V and 50/60Hz. Fixture automatically detects the alternating current frequency. To power the fixture simply plug in the powerCon TRUE1 and set the switch to “ON”. Use only high quality 2.5 mm diameter or larger power feed cables. Make sure you are always connecting the fixtures to a protected circuit with appropriate electrical ground. - Page 10 Before mounting the fixture read and follow the safety recommendations indicated in the Safety Information. The Portman P3 PIX3L may be installed on a tripod, on a clamp or on Portman Spinner structure. The fixture has 13 mm (0,512 in) hole for a spigot, rigging clamp or a screw. Before rigging operations make sure, that the structure onto which you are mounting the fixtures can withstand the weight of all of the fixtures.
-
Page 11: Lamp And Fuse Replacement
USER MANUAL – Portman Custom Lights P3 PIX3L Lamp and fuse replacement To replace the lamp: • Disconnect the fixture from AC power. • Make sure the fixture is cool. • Open the front cover by releasing 2 screws located on right and left side of the front cover. -
Page 12: Portman Spinner
Before building a structure with Portman Spinners read and follow the safety recommendations indicated in the Safety Information chapter. Each Portman Custom Lights P3 PIX3L comes with a Portman Spinner that allows you to build structures with P3s easily. Portman Spinner is a construction element designed especially for P3 PIX3L fixtures. - Page 13 REMEMBER! Only qualified person can assembly fixtures together with Portman Spinners and hang them on the structures! REMEMBER! Do not mount more than 7 P3s on one Portman Spinner structure! Always attach Portman Spinner structure to a mounting surface with at least two clamps.
-
Page 14: Operation Modes
The Portman P3 PIX3L can work in three operation modes: Wired DMX mode, Wireless DMX mode (if the WDMX card is installed) and standalone mode. You can link The P3 PIX3L to a DMX controller using a 5 pin DMX wires, or Wireless Solution Sweden hardware (if WDMX card is installed). You can control each channel individually whether with a DMX controller or a manual control build in the fixture. -
Page 15: Menu
USER MANUAL – Portman Custom Lights P3 PIX3L Menu Navigation buttons are located under the LCD display on the back panel. To enter the menu hold enter button for 2 seconds. To navigate the menu use the “+” and “-“ buttons. To exit the menu from any level hold enter for 2 seconds or use the exit function. - Page 16 Help preserve the environment! Ensure that this product is recycled at the end of its life. Your supplier can give details of local arrangements for the disposal of Portman products. © Portman Lights sp. z o.o. Designed and made in...
Need help?
Do you have a question about the P3 PIX3L and is the answer not in the manual?
Questions and answers