Philips HTR5204/12 Service Manual page 11

DISASSEMBLY INSTRUCTIONS
Dismantling of the top cover Assembly
1) Loosen 5 screws and remove the Top Cover by lifting the rear portion upwards before sliding it out towards the rear.
- 3 screws "A" on the back as show in fi gure 1
- 1 screws "B" each on the left & right side as show in fi gure 2
Dismantling of the front panel Assembly
1) Loosen 6 screws & lift up the top edge of Front Panel assembly to free some catches before sliding it out towards the front.
-1 screw "C" on the inside as show in fi gure 3
-1 screw "D"each on the left & right side as show in fi gure 4
C
Figure 3
3 - 1
A
Figure 1
B
Figure 2
D
Figure 4
E
Figure 5
Dismantling of the Main PCB
1) Loosen 4 screw " F " on the top of main board as shown in fi gure 6.
2) Loosen 5 screw "G" at the back panel as shown in fi gure 7.
3 - 1
F
Figure 6
G
Figure 7