Honda iGX240 Owner's Manual page 21

10/09/09 19:52:21 32Z8R800_019
Specifications (low profile types)
iGX270
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
[Bore × Stroke]
Net power
(in accordance
with SAE J1349 ) ＊
Max.
Net torque
(in accordance
＊
with SAE J1349 )
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
iGX340/iGX390
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
[Bore × Stroke]
Net power 8.0 kW (10.8 PS, 10.7 bhp) at 3,600 rpm
iGX340
(in accordance
8.7 kW (11.8 PS, 11.7 bhp) at 3,600 rpm
with SAE J1349 ) ＊
iGX390
Max.
iGX340
Net torque
(in accordance
iGX390
＊
with SAE J1349 )
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
＊ The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
386 × 468 × 303 mm
(15.2 × 18.4 × 11.9 in)
26.2 kg (57.8 lbs)
4-stroke, overhead valve,
single cylinder
270 cm (16.5 cu-in)
[77.0 × 58.0 mm (3.03 × 2.28 in)]
6.3 kW (8.6 PS, 8.4 bhp) at 3,600 rpm
19.1 N·m (1.98 kgf·m, 14.1 lbf·ft)
at 2,500 rpm
1.1 L (1.2 US qt, 1.0 lmp qt)
Forced air
CDI type magneto ignition
Counterclockwise
405 × 484 × 313 mm
(15.9 × 19.1 × 12.3 in)
31.4 kg (69.2 lbs)
4-stroke, overhead valve,
single cylinder
389 cm (23.7 cu-in)
[88.0 × 64.0 mm (3.46 × 2.52 in)]
26.4 N·m (2.6 kgf·m, 19.4 lbf·ft)
at 2,500 rpm
26.5 N·m (2.7 kgf·m, 19.5 lbf·ft)
at 2,500 rpm
1.1 L (1.2 US qt, 1.0 lmp qt)
Forced air
CDI type magneto ignition
Counterclockwise
Tuneup Specifications (iGX240/iGX270/iGX340/iGX390)
ITEM SPECIFICATION
Spark plug gap 0.7 0.8 mm −
(0.028 0.031 in) −
Valve clearance IN: 0.15
(cold) EX: 0.20
Other No other adjustments needed.
specifications
Quick Reference Information
Fuel Unleaded gasoline
U.S. Pump octane rating 86 or higher
Except Research octane rating 91 or higher
U.S. Pump octane rating 86 or higher
Engine oil SAE 10W-30, API SJ or later, for general use.
Refer to page 9.
Spark plug BPR6ES (NGK)
W20EPR-U (DENSO)
Maintenance Before each use:
Check engine oil level. Refer to page 9.
Check air filter. Refer to page 10.
First 20 hours:
Change engine oil. Refer to page 9.
Subsequent:
Refer to the maintenance schedule on page 7.
Wiring Diagrams
(1) RECTIFIER
(2) INDICATOR
(3) FUSE
(4) ENGINE SWITCH
(5) CONTROL BOX
(6) STARTER MOTOR
(7) BATTERY
ENGLISH
MAINTENANCE
Refer to page: 12
± 0.02 mm See your
± 0.02 mm authorized
Honda dealer
(iGX240/iGX270/iGX340/iGX390)
(Refer to page 8)
(8) OIL LEVEL SWITCH
(9) IGNITION COIL
(10) SPARK PLUG
(11) CHARGING COIL
(12) POWER COIL
(13) ECM
(14) To INTERFACE
19