Making Home-Made Fries - Pyle PKAIRFR22 User Manual

Making home-made fries

To make home-made fries, follow the steps below.
1 Make he potatoes peel and slice.
2 Wash the potato sticks thoroughly and dry them with kitchen paper.
3 Pour 1/2 tablespoon of olive oil in a bowl, put the sticks on top and mix until the sticks
are coated with oil.
4 Remove the sticks from the bowl with your fingers or a kitchen utensil so that excess
oil stays behind in the bowl. Put the sticks in the basket.
Note: Do not tilt the bowl to put all the sticks in the basket in one go to prevent excess
oil from ending up on the bottom of the oil catch plate.
5 Fry the potato sticks according to the instructions in this chapter
Cleaning
Clean the appliance after every use.
Do not clean basket and the inside of the appliance by metal kitchen
utensils or abrasive cleaning materials, as this may damage the non-stick
coating of them.
1 Remove the mains plug from the wall socket and make the appliance cool down.
2 Wipe the outside of the appliance with a moist cloth.
3 Clean the oil catch plate and basket with hot water, some washing-up liquid and a
non-abrasive sponge.
You can remove any remaining dirt by degreasing liquid.
Note: The oil catch plate and basket are dishwasher-proof.
Tip: If dirt is stuck to the basket or the bottom of the oil catch plate, fill the plate with hot water
with
4 Clean the inside of the appliance with hot water and non-abrasive sponge.
5 Clean the heating element with a cleaning brush to remove any food residues.
Storage
1 Unplug the appliance wait for complete cooled down
2 Make sure all parts are clean and dry.
Environment
Do not throw away the appliance with the normal household waste when it is
exhausted, but hand it in at official collection point for recycling. By doing this, you
do contribution to environmental protection (fig.11).