Preparing For Use; Using The Appliance; Hot Air Frying - Pyle PKAIRFR22 User Manual

Preparing for use

Place the appliance on a stable, horizontal and even surface.
Do not place the appliance on non-heart-resistant surface.

Using the appliance

This appliance is able to prepare a huge range of dishes, you may get help from the
recipe book.

Hot air frying

1 Connect the mains plug into an earthed wall socket.
2 Use the basket handle and pull the basket out of air fryer (fig.3).
3 Place the ingredients in the basket(fig 4).
Note: Do not exceed the MAX indication (see section 'settings' in this chapter),
as it may effect the quality of the food.
4 Slide the Basket back into the Air fryer and close the door (fig.5).
5 Turn the temperature control knob to the proper temperature. See section 'Settings'
in this chapter to determine the right temperature (fig.6).
6 Determine the required preparation time for the ingredient (see section 'Settings'
in this chapter).
7 To switch on the appliance, turn the timer knob to the required preparation time (fig.7).
Add 3 minutes to preparation time if the appliance is cold
Note: If you want, you can also preheat the appliance without any ingredients inside.
In that case, turn the timer knob for more than 3 minutes and wait until the heating-up
light goes out (after about 3 minutes). Then fill the basket and turn the timer knob to the
required preparation time.
a The power-on light and the heating-up light go on.
b The timer starts counting down the set preparation time.
c During the hot air frying process, the heating-up light comes on and goes out from
time to time. This indicates that the heating element is switched on and off to
maintain the set temperature.
8 Some ingredients require to shake halfway during the preparation time (see section
'Settings' in this chapter). By this way, pull the basket out of the appliance by the
handle and shake it. Then slide the basket back into the magic fryer (fig.8-9).