Table of Contents
Advertisement
Installing / Removing the Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it.
DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Fitting the Feet
1. Ensure the TV is switched off and not connected to the mains power supply.
2. Lay the TV down on a flat surface ideally on the edge of a table so the base of the TV slightly overhangs the edge of the table,
with the back side facing up. Please make sure a soft cushioned material (such as a dry bath towel or thick piece of foam) is
placed beneath the screen.
3. Screw the leg and foot together with the supplied screw.
4. Position the each foot onto the back of the stand. They are
marked Left and Right on the back of each foot. Make sure
you slide the lug under the recess.
5. Using 3 of the supplied screws, to screw each foot onto the
TV.
10
L43UE17_IB.indd 10
Left foot
Right foot
Table
Cushioned
material
31/07/2017 10:43
Hide quick links:
Advertisement
Table of Contents
