Advertisement
2. Do not use this appliance near bathtubs, showers, basins or other vessels containing
water.
3. When the hairdryer is used in the bathroom, unplug it after use since the proximity of
water presents a hazard even when the hairdryer is switched off.
4. For additional protection, the installation of a residual current device (RCD) having a
rated residual operating current not exceeding 30mA is advisable in the electrical circuit
supplying the bathroom. Ask your installer for advice.
MAINTENANCE
IMPORTANT: Always ensure that the hair dryer is disconnected from the main supply before
cleaning.
Use a damp cloth for cleaning and wipe dry. This will help preserve the original finish of your
hair dryer.
Abrasive cleansers should not be used.
WARNING: Never immerse the hair dryer in water and always ensure that plug is kept dry.
After a period of use, you should take the inlet apart and clean it. Push the air inlet grill to
the left to remove.
After cleaning, insert the air inlet grill onto the back of hair dryer and move to the right until
locked in the right position.
Frequently clean out any hair or fluff that becomes stuck in the inlet filter to prevent overheating.
The list of the marking symbol
V
Volt
W
Watt
Class II appliance
symbol
Hz
Hertz
Alternating current
Do not use this appliance near bathtubs, showers,
basins or other vessels containing water.
Imported By R. Weatherdon & Co Pty Ltd
Sydney - Australia
www.weatherdon.com.au
Made in China
Advertisement
