Hard Drive Format - Q-See QSD6204 User Manual

7.1 Hard Drive Format

HARD When you press the "SELECT" key you will be prompted to input a
DRIVE Password when the hard drive format menu appears.
FORMAT
When you key in the correct password the following message will
flash 3 times.
Otherwise, the following error message will be displayed on the
screen.
Notice: The Factory Default password is 111111.This number (1)
corresponds with the button for camera "one" on the front of your
DVR.
Type Password (6) ::
"password correct Hard Disk Formatting..."
"Password Incorrect"
-21-