INTRODUCTION Thank you for purchasing LED PAR 64 SLIM 7x10W RGBW Mk2. For safety reasons and to ensure the trouble-free operation, carefully read the instructions. SAFETY INFORMATION Installation should be done by qualified personnel in order to minimize the risk of accidental electric shock Disconnect the power supply before installation.
Voltage specification Input Voltage Total Power Frequency 100~245V 50/60Hz Connecting power supply The connection is performed using power cable with PowerCon connector (included). The device must be operated by qualified personnel. Make sure that the power grid supply parameters are consistent with device parameters and limitations are not exceeded.
LED PAR 64 SLIM 7x10W RGBW Mk2 P7100408 / P7100418 DMX channel list Classic 6 [6CH] Channel Function Effect CH 1 Dimmer 0-255: 0-100% 0-10: No Function CH 2 Strobe 11-255: Strobe 1-20Hz CH 3 0-255: 0-100% CH 4 Green...
Page 7
181-235: no function 236-240: sound mode 1 - step change: red-green-blue 241-245: sound mode 2 - step change: red-green-blue-cyan-magenta-yellow-white 246-250: sound mode 3 - step change: red-green-blue-cyan-magenta-yellow 251-255: sound mode 4 - step change: red-magenta-blue-cyan-green-yellow if CH7 is set to 6-125 (color) 0-5: no function 6-255: pulse speed, fast to slow CH 8...
Page 8
LED PAR 64 SLIM 7x10W RGBW Mk2 P7100408 / P7100418 RGB 16-bit [6CH] Channel Function Effect CH 1 0-255: 0-100% CH 2 Red fine 0-255: fine adjustment CH 3 Green 0-255: 0-100% CH 4 Green fine 0-255: fine adjustment CH 5...
LED PAR 64 SLIM 7x10W RGBW Mk2 P7100408 / P7100418 WPROWADZENIE Dziękujemy za zakup urządzenia LED PAR 64 SLIM 7x10W RGBW Mk2. Ze względów bezpieczeństwa oraz w celu zapewnienia bezawaryjnej pracy urządzenia należy dokładnie zapoznać się z instrukcją. ZASADY BEZPIECZEŃSTWA Instalacja powinna być...
LED PAR 64 SLIM 7x10W RGBW Mk2 P7100408 / P7100418 Podłączenie sygnału DMX Połączenie odbywa się przy użyciu przewodu z wtyczkami XLR-Żeński -> XLR-Męski Specyfikacja zasilania Napięcie zasilania Pobór mocy Częstotliwość zasilania 100~245V 50/60Hz Podłączanie zasilania Połączenie odbywa się przy użyciu przewodu zakończonego z jednej strony wtyczką sieci elektrycznej i wtyczką...