First Time Use Of The Oven; Function Selector Control; Thermostat Control; Replacing The Anti-Tilting Oven Shelf - Currys Essentials CBCONW12 Instruction Manual

First Time Use of the Oven

Unpack the oven. Remove any packaging or labels. Use a damp cloth to carefully wipe the inner cavity wall and
housing. Clean all the detachable parts in hot, soapy water before using.
Heat the appliance on maximum, making sure the room is well ventilated as there may be a little smoke and
odour. This is normal, and is due to the protective substance on the appliance which protects it during shipping
from the factory. Switch the appliance off once the smoke and odour has stopped. This can take up to 30 minutes.

Function Selector Control

• This control is used to select the available cooking functions, which are:
Symbol

Thermostat Control

The temperature can be set from 50°C - 240°C. Select the desired temperature, as follows:
To keep food warm
For traditional oven cooking
For all types of grilling

Replacing the Anti-tilting Oven Shelf

• Insert the shelf at an angle with the vertical section to the rear to clear the stops at
either side of the guide slot. Once past this stop the shelf can be placed level again.
• To remove, completely angle the shelf upward so the shelf stop is cleared from the
guide stop.
• Accessible parts may become hot when in use. Children should be kept away.
10
CBCONW_X12_IB rollover.indd 10
Function Description
The oven light will be turned on.
The oven's thermostat and warning lights and the lower and
upper heating elements will be switched on.
The oven's thermostat and warning lights and the lower heating
element will be switched on.
The oven's thermostat and warning lights and the upper heating
element will be switched on.
The oven's thermostat and warning lights and grill heating
element will be switched on.
The oven's thermostat, warning lights, upper and grill heating
elements will be switched on.
50 - 100°C position
50 - 240°C position
190°C position
240
05/12/2014 17:27
240