Advertisement
5.000V 0.000A
0.000mΩ
GOOD
4.856V 0.000A
5.00
V
1.00
9.056V 0.812A
D+3.28
D-0.60
HVDCP QC2.0 9V
2.0
9.056V 0.812A
D+3.28
D-0.60
Main screen2：Evaluate the line resistance of
the charge cables and the line compensate
RDY
ability of power adapter
Menu button
Left|Right button
RDY
0.000mΩ
GOOD
Main screen3：Micro oscilloscope VBUS Curve
0.00
Menu button
Left|Right button
A
Curve speed
0.00
Curve type
Main screen4：Micro oscilloscope D+、D-
Curve
Menu button
Left|Right button
HVDCP
Sniff mode
Main screen4：QC2.0/3.0 Quick charge protocol
test
Menu button
Left|Right button
Warning
Ignore
Switch to other main screen
Automatic calibrate when current is 0, RDY
indicate for ready to test . Connect load to
increase current for evaluate the line
performance.
The resistance measured, the greater the
worse
Inferior Ordinary Good
Quality Gold Artifact evaluate line
compensate ability of power adapter
Adjust the speed and type of curve
Switch to other main screen
Total 4 levels, maximum 100SPS sample
speed
Can only display voltage or current, decrease
display speed
Test QC2.0、3.0 protocol
Switch to other screen
Charge protocol information
Current support QC2.0，Q3. 0，will support
more protocols in future
Press to test QC2.0、3.0 protocol of power
adapter
Change voltage applied for
If the phone or devices connected not
compatible for high voltage , force apply for
high voltage will cause irreversible damage to
!
the devices even burn them. Please test when
no load connect to any interface.
Advertisement
