Advertisement
Advertisement
Table of Contents
Related Manuals for Microsens MS400920
Summary of Contents for Microsens MS400920
- Page 1 Power over Ethernet Injector User Guide MS400920...
- Page 2 Content ......................1 VERVIEW ....................... 3 EATURES ..................4 ARDWARE ESCRIPTION ....................4 ACKAGE ONTENTS ......................5 NSTALLATION...
- Page 3 Overview The Power over Ethernet Injector provides data and AC power through the Ethernet cable to PoE-equipped device, such as AP, PoE splitter or other equipment support IEEE 802.3af standard. The injector supports IEEE 802.3af standard that can detect the connected device, which supports the IEEE 802.3af and then provide the power to the device.
- Page 4 Power over Ethernet Injection Application for PoE device...
- Page 5 Features The following table provides the technical specification of the Power over Ethernet Injector. IEEE802.3 10BASE-T Standard IEEE802.3u 100BASE-TX IEEE802.3af RJ-45 Data in/out: Data/signal pairs pin 1,2,3,6 Connector RJ-45 Power out: power over spare wire pairs pin: 4,5(V+) , 7,8(V-) 10BASE-T: UTP/STP Cat.3,4,5 cable EIA/TIA-568 100-ohm(100m) Network Cable...
- Page 6 Safety CE/EN60950-1 Hardware Description The Power over Ethernet Injector has three connection ports and one LED indicator. We will describe each in following. Data In port: It is an RJ-45 Ethernet interface port for data transmitting into the PoE Injector. It is for connecting with the switch. ...
- Page 7 Compare the contents of your Power over Ethernet Injector package with the standard checklist above. IF any item is missing or damaged, please contact your local dealer for service. Installation To install the Power over Ethernet Injector, please follow the steps below. 1.
Need help?
Do you have a question about the MS400920 and is the answer not in the manual?
Questions and answers