Managing Attendees; Re-Ordering Attendees And Changing View; Adding And Removing Attendees; Make An Attendee Full Screen (Active Display) - Black Box WC-COA-MPE User Manual

Coalesce: meeting place edition

Table of Contents

CHAPTER 5: MANAGING ATTENDEES

Attendees will appear in the Coalesce Meeting Place Edition (MPE) view when connected, as seen below. Up to a maximum of 6

attendees can be connected at once.

You can alter this view by using the slider at the bottom of the screen. You can change from having 1 device on screen to a arrangement

of up to 4 screens.

Attendees can join at any time during a session. If joining after a session has started, the Meeting ID will be visible in the top left

corner of the Coalesce MPE display. Tapping on this will open the Coalesce MPE Meeting ID screen with the Meeting ID in a larger

format. If the maximum amount of attendees are already connected, attendees can easily be removed by dragging an attendee's

display to the trash bin. If an attendee wants to disconnect he can select to "Leave Coalesce MPE" in the app, or disconnect

from Airplay or Miracast

To select an attendee as the Active Display, double tap that attendee in the Coalesce MPE view; this display will then become full

screen. This screen is now the "Active Display."

Attendee's displays can be easily swapped between by using the Sidebar—expand the Sidebar by pulling the tab from the right side

of the screen. Drag and drop the desired screen to change the Active Display.

FIGURE 5-1. COALESCE MPE VIEW

FIGURE 5-2. SLIDER BAR

1.877.877.2269

BLACKBOX.COM

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

Table of Contents