Saving A Setup - Dakota MAX II Operation Manual

Dakota Ultrasonics
3) Press the ENTER key to display the Setup List Box.
4) Use the UP and DOWN arrow keys on the left button wheel to scroll
through the setups until the target setup is highlighted.
5) Press the ENTER key to activate the confirmation screen.
6) Press the OK key to load the setup from memory.
7) Press the MEAS key to return to the measure screen.

15.3 Saving a Setup

Once the MAX II parameters and features have be adjusted for an application, the
user may elect to save these setting to a specific setup location for future use. This
can potentially save time and reduce error between users.
It is sometimes necessary to rename a previously saved setup, or add additional
comments about a particular setup. The setup name may have been entered
incorrectly, or the user needs to use the setup for a completely different project. An
inspector's name or other comments about the project may also be required for
additional documentation purposes. The following procedures outline the necessary
steps for saving and editing a setup:
192