Dakota MAX II Operation Manual page 163

3) Press the ENTER key to display the Digits Edit Box.
4) Press the UP and DOWN arrow keys multiple times using the left or
right button wheel to scroll the highlighted value.
5) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the digit locations.
6) Repeat steps 4 & 5 until the Approx. Len. value is correctly displayed.
7) Press the OK key to set the Approx. Len. and return to the menu screen, or
ESC to cancel entering the Approx. Len.
Note: If the Approximate length has been entered into the MAX II, the Auto
Set feature can be run simply by pressing the AUTO SET key on the left side of
the keypad.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the UTIL menu is highlighted and displaying the submenu items.
Alternatively, press the
using the left button wheel.
Using Auto Set
LEFT and RIGHT arrow keys multiple times
155
MAX II Bolt Tension Monitor