Editing An Contacts Entry; Setting Speed Dial Numbers - Sanyo SCP-3200 Operating Manual

Editing an Contacts Entry

To make changes to an entry:
1. From standby mode, press Contacts(right softkey).
2. Select the entry you wish to edit and press MENU/OK.
3. Select the phone number and press Options (right softkey) highlight Edit and
press MENU/OK.
-or-
Select an email address or Web address, and then press Edit (right softkey).
4. Select the label filed you want to edit and press MENU/OK.
5. Select the entry by using your keypad and press MENU/OK.
6. Press Save (left softkey) to save your changes.

Setting Speed Dial Numbers

With this feature you can dial Contacts Directory entries with one key press for locations 2-9.
Save your memory locations 2-9 for speed dialing your most commonly used phone numbers.
Speed Dial numbers must be stored in your Contacts to use this feature.
To set Speed Dial:
1. Press MENU/OK to access the main menu.
2. Select Contacts and press MENU/OK.
3. Select Speed Dial #s and press MENU/OK.
4. To select a corresponding speed dial number from 2-9, highlight an unassigned number
and press MENU/OK.
5. Select an entry from the list and press MENU/OK.
6. Select the phone number you want to set as a speed dial and press MENU/OK.
When you highlight an assigned number and press MENU/OK, you'll be asked whether
you want to overwrite the assigned number. Select Yes to overwrite or No to cancel.
To use Speed Dial:
From standby mode, just press and hold the appropriate key.
To cancel a stored speed dial number:
1. Press MENU/OK to access the main menu.
2. Select Contacts and press MENU/OK.
3. Select Speed Dial #s and press MENU/OK.
4. Highlight the stored speed dial number you want to cancel and press MENU/OK.
5. Highlight Reset and press MENU/OK.
41