ORIGINAL INSTRUCTIONS Cordless Pole Hedge Trimmer RPT3600...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
Safety, performance, and dependability have been given cord suitable for outdoor use reduces the risk of electric top priority in the design of your cordless pole hedge shock. trimmer. If operating a power tool in a damp location is ■ unavoidable, use a residual current device (RCD) INTENDED USE protected supply.
before use. Many accidents are caused by poorly and pets at least 15 m away from work area. Stop the maintained power tools. product if anyone enters the area. ■ Do not allow children or untrained individuals to use the ■...
wear non-slip, heavy-duty protective gloves. Do not agents such as garden chemicals and de-icing salts. Do place your hand or fingers between blades or in any not store outdoors. position where they could get pinched or cut. ■ Cover the blade with the blade protector before storing the product or during transportation.
working condition. Any part that is damaged should be Electrical hazard, at least 10 m away properly repaired or replaced by an authorised service from the overhead electric-power lines centre. RESIDUAL RISK Remove the battery pack before Even when the product is used as prescribed, it is still starting any work on the product.
PRODUCT SPECIFICATIONS Cordless Pole Hedge Trimmer Model RPT3600 Rated voltage 36 Volts No-load speed 1,500 min Blade type Dual reciprocating Teeth pitch 35 mm Blade length 440 mm Usable cutting length 385 mm Cutting capacity 28 mm Maximum product working length 2.4 m...
Page 24
Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 961478078-02...
Need help?
Do you have a question about the RPT3600 and is the answer not in the manual?
Questions and answers