Table of Contents
Advertisement
3.
You can remove the Micro SD card by lightly pressing the card to make it half pop-out,
and then pull it out gently.
Note:
Micro SD card (TF card) is a small-size external flash memory card. It is usually used in cell
phone, PDA etc. Ordinary SD card is larger than Micro SD card, and is not suitable for V2
series handheld. Please be sure not to mix them up.
Installing SIM Card
1.
Open the soft rectangular plug at the right side of the handheld, you can find the SIM
card slot.
2.
Put the SIM card upside down (the metal surface upward), as shown below. Then push
the card into the slot until the card is completely inside. And then close the plug.
Basic Operations
19
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the GeoRef V2G and is the answer not in the manual?